1. REMOVE STARTER DUST PROTECTOR

(a) Remove the 2 dust protectors.

2. REMOVE STARTER YOKE ASSEMBLY

(a) Remove the nut and disconnect the lead wire from the magnetic switch terminal.

(b) Remove the 2 bolts.

(c) Pull out the starter yoke with the armature from the magnetic switch.

(d) Remove the O-ring from the starter yoke.

3. REMOVE STARTER CLUTCH SUB-ASSEMBLY

(a) Remove the 2 screws.

(b) Remove the return spring, idler gear, clutch roller, retainer, O-ring and starter clutch from the starter housing.

(c) Using a magnetic finger, remove the steel ball from the clutch shaft hole.

4. REMOVE STARTER BRUSH HOLDER ASSEMBLY

(a) Remove the 2 screws, 2 O-rings and end cover from the starter yoke.

(b) Remove the O-ring from the starter yoke.

(c) Using a screwdriver, hold the spring back and disconnect the brush from the brush holder.

(d) Disconnect the 4 brushes and remove the brush holder.

5. REMOVE STARTER ARMATURE ASSEMBLY

(a) Remove the starter armature from the starter yoke.